x (x)

Kunz Toothed Iron for Quangsheng 62 Low Angle Jack

Please click on image to view a larger image

More Views

Availability: Out of Stock


Kunz Toothed Iron for Quangsheng 62 Low Angle Jack

A toothed iron wastes material rapidly with no danger of tearout, they are particularly useful on exotics, burrs and very hard timbers that baulk at a heavily set jack plane.

With its low bedding angle and excellent clearance for the voluminous shavings produced, a No.62 with a toothed iron is always my first choice for toothed planing.

The steep 50 degree blade available for the No.62 also makes it an ideal choice of tool for the finer work of planing to a finish afterwards.

Sharpening toothed plane blades is easy - just a single flat bevel and then wipe the toothed side on your workshop leather to remove any burr on the back. Ideally they should be used with the mouth of the plane set wide.

Toothed or ‘toothing irons’ are also used for preparing the groundwork for veneers. One of the benefits of V shaped teeth (as opposed to square ones) is that they can also do this fine texturing work simply by setting the plane for a finer cut.

These high quality German made toothed plane blades are made from 2.5mm thick CrV steel and hardened to RC61.

Customer Reviews

Written by: Mike Wingate
Really useful
Since I bought my QS62, i have wanted this blade. I now have the Swiss Army knife of planes. Rough planks are easily dealt with, planing across the board rather than with the grain. Really hard woods are quickly levelled. The blade is flat, hard and retains its edge. A must to buy.
Product Tags

Other people marked this product with these tags:

Loading Image
Loading Image
Loading Image