The York HV515 is a small cast iron bodied bench vice spindle for front vices on European workbenches, with a cast iron handwheel instead of a tommy bar arrangement. Screwed beneath the top and fitted through the apron they provide an unobtrusive and reliable working mechanism.
A circlip on the end of one of the spindles prevents the vice from being unintentionally withdrawn completely from the bench. When installing, check that the two nuts that hold the guide rods through the front plate are done up good and tight.
- Thread: 24mm x 5mm
- Length: 390mm
- Working length: 205mm
- Handlwheel diameter: 5" / 130mm