Scary Sharpening Kit (Magnum) + Richard Kell No. 2 with 10% off

Please click on image to view a larger image

More Views

Availability: In stock

£119.61

£119.61

* Required Fields

£119.61

Workshop Heaven Scary Sharpening Kit (Magnum) + Richard Kell No. 2

119.61

The new and improved Workshop Heaven Scary Sharpening Kit (Magnum) with Richard Kell No. 2 Honing Guide contains:

  • A rock solid, 18-1/2 inch (470mm) wide block of dead flat 10mm thick float glass. This provides the ideal substrate for use with sheet abrasives.
  • A soft suede leather mat to support the float glass and keep it in place. 
  • 2 sheets each of 40 micron, 30 micron, 15 micron and 9 micron, pressure sensitive adhesive backed, aluminium oxide microfinishing film. A heavier duty version of standard lapping film with a thicker backing and a stronger resin coating.
  • 2 sheets each of 3 micron and 1 micron lapping film. The 3 micron grade has a 'P' resin coating making it slightly more durable than the other superfine grades. The 1 micron film is roughly equivalent to an 11,000 grit Japanese waterstone.
  • 1 sheet of 100 micron microfinishing film for heavier material removal, regrinding primary bevels for example. This can either be stuck to the back of the glass or any other convenient flat surface: absolute flatness is less critical for grinding than honing.
  • 125ml of HoneRite No.1 - an ultra low viscosity honing lubricant that actively prevents corrosion and dries fully - thus preventing your sheets from becoming a dust magnet. Wiping your tools over with it after sharpening will also help to keep them rust free.
  • Richard Kell No.2 Honing Guide (0 to 2-5/8 inch) with large rollers. Suitable for most square-sided chisels and plane irons. 
  • Please note : HoneRite No.1 cannot be sent by Airmail.


3M lapping and microfinishing films are extremely accurate superabrasives that provide precise, consistently uniform, close-tolerance finishes. A high-strength polyester film backing is coated with premium, micron-graded mineral particles that are electrostatically oriented for greater cutting efficiency. The particles are bonded into a layer of resin that holds the particles in place for increased durability. PSA is the acronym for Pressure Sensitive Adhesive and is a heavy duty version of the adhesive on the back of a Post-It note.

To use, cut each sheet into four 2-1/2 inch (63mm) strips, peel off the backing and carefully fix a strip of each grade next to each other on the piece of float glass applying firm pressure for an even secure bond, be careful to avoid trapping air bubbles and leave a 2cm gap at either edge. Spread a drop of HoneRite No.1 (or water if you are using this method in conjunction with waterstones) on the surface of the lapping film to lubricate the process and prevent swarf from building up.

With the blade angled fractionally steeper than the primary bevel angle, work the down the grits using pull strokes only - one or two strokes on each strip. This system works particularly well with a honing guide, we recommend Richard Kell's guides because of their exceptional accuracy and repeatability.

A few strokes flat on the back of the blade starting from the 9 micron film will remove the burr and leave you with an exquisitely fine edge.

Regular price of these products if purchased separately: £145.59

10% off - was £132.00 now  £118.80

Matthew's Sharpening Chisels - Practice Video

Customer Reviews

Product Tags
Loading Image
Loading Image
Loading Image