Products tagged with 'Stock Preparation'

Page:
  1. 1
  2. 2
Grid  List 
  1. Clifton Low Angle Block Plane (Adjustable Mouth)

    £288.00

    The new Clifton block plane is based on the proportions of a No. 9-1/2 low angle block plane. A little broader than the 60-1/2 with a generous cutting width of 1-5/8", they sit particularly well in a medium to large hand.

    Clifton block planes are made from vacuum cast bronze, a technique that ensures a very high integrity casting with no voids or porosity. Like the Clifton bench planes each one is individually machined and then fini...

  2. Clifton No 5 1/2 Heavy Jack Plane

    £324.00
    The Clifton No 5-1/2 heavy jack plane is a slightly longer, wider and heavier version of the Clifton No 5 and used for the same wide range of applications....
  3. Clifton No 5 Jack Plane

    £318.00
    The Clifton No 5 jack plane has become the all rounder of the modern workshop. At just under 14" long it is a very useful plane for flattening out problems like cupping, bowing and twist and for removing snipe, scalloping and saw marks. It is a very effective plane to use with a shooting board....
  4. Clifton No 6 Fore Plane

    £348.00
    18" long with a 2-3/8" blade the Clifton No. 6 fore plane is a more manageable size than a full length jointer and perfectly capable of accurately jointing edges up to 6 feet long and makes an excellent choice for shooting as well as jointing boards and flattening large panels....
  5. Out of Stock

    Clifton No 7 Try Plane

    £372.00
    At 22" (over half a metre) long, the Clifton No.7 is big, solid, accurate plane designed for flattening surfaces and preparing the edges of boards that are to be joined together. The balance of the Clifton makes it much less unwieldy than you might imagine, indeed for some woodworkers the No.7 is their main handplane....
  6. Dorchester 14" 13tpi Tenon Saw Rip

    £117.50
    Roberts & Lee Dorchester backsaws are a pleasure to work with, the teeth are set and sharpened by hand and cut smoothly with very little effort. This is a new and improved 2017 version with a walnut handle finished with Danish oil.

    This 13tpi saw is designed for ripping along the grain to cut the cheeks of tenons and bridle joints. If you do have to dovetail thicker boards for chests, benches or tables it's nice to be able to bring ou...
  7. Out of Stock

    Dorchester 24" 4.5tpi Rip Saw

    £117.30
    Roberts & Lee Dorchester handsaws are taper ground, with a breasted toothline and precisely set and sharpened by hand to ensure the best possible cut without binding. The American black walnut handle has a hand wiped Danish oil finish. This 4.5tpi saw is designed for ripping along the grain, it will happily zip through half inch material without grabbing and will cope with material up to two inches thick....
  8. Dorchester 24" 8tpi Hand Saw

    £118.50
    Roberts & Lee Dorchester handsaws are taper ground, with a breasted toothline and precisely set and sharpened by hand to ensure the best possible cut without binding. This 8tpi crosscut saw is designed for sawing across the grain, cutting boards to length, notching for large scale joinery and is also a good choice for quickly dimensioning sheet goods....
  9. Gyokucho 616 Ryoba Seiun Sako (re-saw) 300mm

    £44.50
    The Gyokucho 616 Ryoba is a big Japanese saw suitable for large scale joinery, resawing and dimensioning boards. The 300mm long blade has aggressive tooth patterns on both edges - one for crosscutting, the other for ripping. In either direction it will happily whizz through 4" of beech with impunity. When first starting out with a saw this big, it really pays to take your time and let the saw do the work. The blades of Gyokucho saws are ...
  10. Kinex DIN874/2 Straightedge 1000mm

    £83.50
    Straight to better than +/-16.5 microns (0.00065") over the entire length on both edges. Kinex manufacture straightedges in a wide range of accuracies this is made from stress relieved spring steel amd conforms to DIN 874/2 a good grade for general engineering and fine cabinetmaking without being too expensive. ...
  11. Kinex DIN874/2 Straightedge 500mm

    £52.90
    Straight to better than +/-10.5 microns (0.00042") over the entire length on both edges. This is made from stress relieved spring steel, and conforms to DIN 874/2 - a good grade for general engineering and fine cabinetmaking without being too expensive. ...
  12. Kinex DIN874/2 Straightedge 750mm

    £68.30
    Straight to better than +/-13.5 microns (0.00053") over the entire length on both edges. Manufactured from stress relieved spring steel, it confirms to DIN 874/2 a good grade for general engineering and fine cabinetmaking without being too expensive. ...
  13. Out of Stock

    Kunz 2 inch Toothed Plane Iron

    £25.00
    The 2in (50mm) Kunz toothed plane blade fits all makes of No.4 and 5 bench planes. Because toothed plane irons produce tiny ribbons rather than one continuous shaving there is no risk of tearout, even on really gnarly interlocked grain. This means that you can focus all of your attention on the shape of the board without a second thought for tearout until you reach the smoothing stage. Sharpening toothed plane blades is easy - just a single...
  14. Kunz Toothed Iron for Quangsheng 62 Low Angle Jack

    £42.50

    A toothed iron wastes material rapidly with no danger of tearout, they are particularly useful on exotics, burrs and very hard timbers that baulk at a heavily set jack plane.

    These high quality German made toothed plane blades are made from 2.5mm thick CrV steel and hardened to RC61.

    ...
  15. Pax 1776 14 inch 15tpi Heavy Tenon Saw (crosscut)

    £162.50
    Commissioned by Workshop Heaven and intended specifically for the cabinetmaking market, the new Pax 1776 heavy tenon saws are toothed for working in hardwoods. The blade is a full 14 inches long for smooth, flowing strokes and has a generous 3-1/2 inch depth. The heavy, hand polished, folded brass back gives the saw its power, once the kerf is established you can allow the full weight of the saw to rest on the timber and just let it purr through...
  16. Quangsheng No. 5 Bedrock Pattern Jack Plane

    £149.50
    The Quangsheng No.5 jack plane is designed to be used across the grain, its weakest direction, to correct twists, cupping and bowing and bring the board close to the finished dimension. The blade should be honed with a camber to leave a scalloped surface, this minimises the amount of material you need to remove with the longer No.6 or No.7 planes to bring the board to size. The narrow 2" blade of the No.5 makes it easier to push so you can tak...
  17. Quangsheng No. 5-1/2 Bedrock Pattern Jack Plane

    £164.50
    In many ways it is better to think of the 5-1/2 as a short try plane or panel plane, rather than a broad jack plane. It takes a broad, shallow shaving, so if you work with reasonably straight or pre-machined material it will deal with small corrections on wide surfaces very efficiently. Conversely, if you work with timber that starts off like a propeller blade, the narrower No.5 honed with a steep camber and used across the grain (the traditio...
  18. Quangsheng No. 6 Bedrock Pattern Fore Plane

    £175.50
    The Quangsheng No.6 fore plane is the most manageable of the three types of long flattening planes. Popular with furniture makers it is a nicely sized workhorse for dressing and squaring stock accurately to dimension. The name 'fore plane' originates from an earlier application where this size of plane would have been used be'fore' the others for the cruder task of levelling off boards that had been riven (split) and then hewn with axes and a...
  19. Quangsheng No. 62 Low Angle Jack Plane

    £159.50

    The Quangsheng Low Angle Jack is the Swiss army knife of hand planes, and an excellent choice for beginners looking for a straightforward, versatile, multi-function tool as their first premium bench plane.

    Since the whole point of a bevel up plane is its versatility, we supply the Quangsheng No 62 with the standard 25 degree iron and offer the option of adding the 38 degree and the 50 degree cutting irons at a special discount when pur...

  20. Quangsheng No. 7 Bedrock Pattern Try Plane

    £219.50
    At 22 inches the No. 7 try plane is the longest of the general use handplanes. It is four and a half inches longer than a No.6 and about 400g heavier. Excellent for jointing the edges of boards. The long soles of fore planes and try planes ride over the perpendicular or diagonal furrows left after jack planing (or on a smaller scale those left by the planer thicknesser). They span the low spots and nip off the crests to bring the surface into...
Page:
  1. 1
  2. 2
Grid  List 
Loading Image
Loading Image
Loading Image