Moore & Wright

Moore & Wright

Founded in 1906 by innovative young engineer Frank Moore, Moore & Wright have been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years.
Grid  List 
  1. Moore & Wright Measuring Set

    £58.20

    To produce accurate joinery efficiently there are lots things that you need to get right; preparing the timber accurately, putting the line in the right place, marking the waste, not crossing the lines, and checking your work at each stage before moving on. Getting to the end and realising that the fit is poor because your pound shop engineers square isn't quite square is utterly soul destroying. 

    T...

  2. Moore & Wright 400 Series Engineers' Square 75mm (3 inch)

    £25.00

    The blades of Moore & Wright 400 series BS939 Grade B 3" Engineers' squares are straight to a maximum total deviation of 8 microns, the working faces of the stock are ground to a unilateral (concave) tolerance of 4 microns and the two are square to each other (inside and outside) to a maximum total deviation of 16 microns.

    Engineers' squares have largely replaced conventional woodworking squares because of their superior abil...

  3. Moore & Wright 400 Series Engineers' Square 100mm (4 inch)

    £25.00

    The blades of Moore & Wright 400 series BS939 Grade B 4" Engineers' squares are straight to a maximum total deviation of 8 microns, the working faces of the stock are ground to a unilateral (concave) tolerance of 6 microns and the two are square to each other (inside and outside) to a maximum total deviation of 16 microns.

    Engineers squares have largely replaced conventional woodworking squares because of their superior abili...

  4. Moore & Wright 400 Series Engineers' Square 150mm (6 inch)

    £32.20

    The blades of Moore & Wright 400 series BS939 Grade B 6" Engineers' squares are straight to a maximum total deviation of 8 microns, the working faces of the stock are ground to a unilateral (concave) tolerance of 6 microns and the two are square to each other (inside and outside) to a maximum total deviation of 16 microns.

    Engineers squares have largely replaced conventional woodworking squares because of their superior abili...

  5. Moore & Wright 150mm Dividers

    £19.20
    The hardened steel legs of Moore & Wright dividers are carefully heat treated so they can be thin yet surprisingly stiff. The bowspring offers just the right resistance to hold a measurement beautifully without making them heavy to adjust....
  6. Moore & Wright 100mm Dividers

    £17.60
    The hardened steel legs of Moore & Wright dividers are carefully heat treated so they can be thin yet surprisingly stiff. The bowspring offers just the right resistance to hold a measurement beautifully without making them heavy to adjust....
  7. Moore & Wright ER106F Flexible Steel Engineers' Rule 150mm (6 inch)

    £8.50
    The Moore and Wright ER06F is a high quality 150mm / 6" flexible engineers rule, correctly tempered and standard at 20 degrees C with anti-glare finish and permanently etched markings. Imperial on one side (6" in 10ths, 20ths, 50ths and 100ths as well as 16ths, 32nds and 64ths) Metric on the other (150mm in mm and 0.5mm). D end with hanging hole....
  8. Moore & Wright ER112 Steel Engineers' Rule 300mm (12 inch)

    £14.00
    The Moore and Wright ER112 is a high quality 300mm / 12" engineers rule, correctly tempered and standard at 20 degrees C with anti-glare finish and permanently etched markings. Imperial on one side (12" in 10ths, 20ths, 50ths and 100ths as well as 16ths, 32nds and 64ths) Metric on the other (300mm in mm and 0.5mm). D end with hanging hole....
  9. Moore & Wright ER424 Steel Engineers' Rule 600mm (24 inch)

    £35.00
    The Moore and Wright ER424 is a high quality 600mm / 24" engineers rule, correctly tempered and standard at 20 degrees C with anti-glare finish and permanently etched markings. Imperial on one side (24" in 10ths, 20ths, 50ths and 100ths as well as 16ths, 32nds and 64ths) Metric on the other (600mm in mm and 0.5mm).
    • D end with hanging hole
    • 600mm / 24"
    • Imperial / Metric
    ...
  10. Moore & Wright 911 Imperial Feeler Gauge Set

    £8.60
    From the Moore & Wright ‘safe and sure’ range, this set of 4" long ½" wide feeler gauges are graduated in thou and cover a range from 0.0015" to 0.025". The hardened, tempered and polished blades are protected by a riveted steel cover with an adjustable tension screw. Sizes in 1/1000 inch: 1.5, 2, 3, 4, 6, 8, 10, 12, 15 and 25 They come lightly oiled and wrapped in ferro-guard paper and have that lovely ‘new tool’ smell....
  11. Moore & Wright 911M Metric Feeler Gauge Set

    £8.60
    From the Moore & Wright ‘safe and sure’ range, this set of 100mm long 12.7mm wide feeler gauges are graduated in mm to two decimal places and cover a range from 0.05mm to 0.80mm. The hardened, tempered and polished blades are protected by a riveted steel cover with an adjustable tension screw. Sizes in mm: 0.05, 0.10, 0.15, 0.20, 0.30, 0.40, 0.50, 0.60, 0.70 and 0.80. They come lightly oiled and wrapped in ferro-guard paper and have ...
Grid  List 
Loading Image
Loading Image
Loading Image