x (x)

Bad Axe

Bad Axe

Handcrafted in the town of La Crosse on the banks of the beautiful upper reaches of the Mississippi river, the lavish investment of time in the manufacture of Bad Axe saws is evident with every stroke.

Bad Axe saws are made in the American tradition for accurate, fast cutting backsaws with low hang angles and aggressive pitches. Every Bad Axe saw is individually hand filed and hammer set. Before they leave

Bad Axe Tool Works, each saw is individually tested by cutting to the full depth of the saw plate in black locust wood to check that it has been tuned to perfection. The overall standard of fit and finish is beautiful. From the polished sawplate with individually hand filed teeth, to the comfortable neatly installed handle, they are almost as impressive to look at as they are to use.

Grid  List 
  1. Out of Stock

    Bad Axe D8 Rip Saw 'Henry Disston' 24in RIP Thumbgrip Handle

    £420.00

    The Bad Axe D8 handsaw is it’s hammer tensioned, tempered and taper ground 1095 spring steel saw plate. The five teeth per inch (6ppi)teeth are hand filed to joint and hammer set, so each one works in harmony with its neighbours and takes an equal share of the work giving an aggressive configuration that takes a generous bite and has plenty of space in the gullets to clear the swarf.

    The hickory handle shape is classic Disston, e...

  2. Bad Axe Bench Hook Set

    £75.00

    Handmade in Wisconsin from solid quartersawn American oak, with full width housing joints to hold the fences square to the board and brace it for added stiffness and saw kerfs at -45, 90 and +45 in the fences for mitre box work.

    • Width 150mm / 6"
    • Length 280mm / 11"
    ...
  3. Bad Axe Bench Hook Set Left Handed

    £75.00

    Handmade in Wisconsin from solid quartersawn American oak, with full width housing joints to hold the fences square to the board and brace it for added stiffness and saw kerfs at -45, 90 and +45 in the fences for mitre box work.

    Left handed    Width 150mm / 6"     Length 280mm / 11"

    ...
  4. Bad Axe D8 Handsaw 'Henry Disston' 24in Cross cut

    £400.00

    The Bad Axe D8 handsaw is an efficient tool for crosscutting boards to length and making partial crosscuts for housings, halving joints, saddle joints etc.

    The hammer tensioned, tempered and taper ground 1095 spring steel saw plate is beautifully finished with a detailed etch. The eight teeth per inch (9ppi) teeth are hand filed to joint and hammer set giving a fast, smooth cutting action and an accurately plumb cut on a wide range of...

  5. Out of Stock

    Bad Axe 16in Large Tenon Saw 12ppi

    £280.00

    With an impressive four inches of draught below the spine, and sixteen inches of stroke, the Bad Axe Tenon is a proper large capacity backsaw that will make short work of crosscutting your boards one minute and then sink itself spine deep to form large tenon cheeks the next.

    It has a regular sized Hickory handle and black oxided steel spine.  The 0.025” thick plate of hardened Swedish saw steel comes with 12ppi (11tpi) hybri...

  6. Out of Stock

    Bad Axe Bayonet Carcase Saw 14in 14ppi

    £275.00

    The bayonet is to carcase saws as the stiletto is to dovetail saws; a longer, lower, leaner version aimed squarely at the fine woodworking market.

    The long stroke brings a wonderful easy fluidity to your sawing action; it also means you can have finer teeth that leave a clean finish without compromising efficiency.

    Our stock Bad Axe bayonet carcass comes with a regular hickory handle, gun blued back and brass medallion and scre...

  7. Out of Stock

    Bad Axe Stiletto Dovetail Saw 12in 15ppi Rip

    £255.00

    The Bad Axe Stiletto dovetail saw is fast, accurate and well suited to a 'get her done' approach to sawing, but there is more to this dovetail saw than meets the eye.

    The shallow plate depth and low hang angle gives the saw a light, very pointable feel that aids precision and cuts fatigue to a minimum.

    Our stock Bad Axe stiletto comes with a regular hickory handle, gun blued back and brass medallion and screws. 15ppi and...

Grid  List 
Loading Image
Loading Image
Loading Image