This bundle deal includes a Quangsheng Low Angle Block plane for chamfering waste to eliminate breakout, tidying up the ends of boards after cutting to length, and fixing any slight inaccuracies from the earlier stages of production and a No. 4 smoothing plane, designed to produce a silky smooth surface ready for polishing.
Quangsheng No.4 Bedrock Pattern Smoothing Plane
The short sole allows it to follow slight inconsistencies in the surface more than a long plane would. This gives it a better chance of hitting any remaining low spots and creating a flawless, even surface, without significantly altering the thickness of the component. Given the importance of their role, smoothers are very carefully set up and rarely used for anything else. The cutting iron is kept extremely sharp with an almost imperceptible camber and the mouth set very fine.
The No.4 is the most popular of all the bench planes, which makes logical sense. If you are going to invest in a shiny new precision ground handplane, the one that you use to produce your finished surfaces tends to be at the top of the list.
Quangsheng bedrock pattern handplanes, unlike the more common Bailey pattern, have a full contact area between the body and the frog, hence the name 'bedrock'. The frog can also be adjusted to widen or narrow the mouth of the plane without the need to remove the irons. Simply loosen the two locking screws on either side at the back of the frog, adjust the central screw to set your desired mouth opening and then nip up the side screws again. This system is easier, faster, much more accurate, and less likely to damage the cutting edge.
Specifications:
- Precision ground, unbreakable CR40 alloy steel casting
- Engineered lateral adjuster with guide bearing and brass tab
- Low profile cap iron
- Brushed finish stainless steel lever cap
- Cherry handles
- Conforms to British Standard
- Sole Dimensions 10in x 2⁷⁄₁₆ in (250mm x 62mm)
- ⅛ in (3mm) thick 2in (50.8mm) cutting iron made from T10 carbon steel hardened to RC63
Quangsheng Low Angle Block Plane
One of our most popular tools, this is a really useful piece of kit. Block planes tend to be among the first tools that people buy, they are a staple of the basic toolkit for most types of woodworking.
Block planes are used for chamfering waste to eliminate breakout, tidying up the ends of boards after cutting to length, and fixing any slight inaccuracies from the earlier stages of production. The short sole makes them ideal for tidying up little patches of tearout and their relatively light weight means that after a while you almost use them without thinking.
Specifications:
- Bronze cap and brass fittings
- T10 iron hardened to RC60-63
- Sole Dimensions 6½in x 1¾in (165mm x 44mm)
- Bedding angle 12 degrees
- Primary bevel 25 degrees
- Supplied as standard with the 25 degree iron
Please note that we are unable to ship Quangsheng products to North America due to retail exclusivity restrictions.
