New

New

Page:
  1. 1
  2. 2
Grid  List 
  1. Workshop Heaven Hand Stitched Cabinet Rasp 250mm No.3 (14tcm)

    £46.50
    Long, broad, and highly efficient, this coarse rasp is used for initial shaping of larger workpieces like table legs, arched aprons or large sculptural pieces. Forming the initial facets that define the curves and proportions of the piece. Shoulder to tip: 250mm Overall length: 395mm approx Face width: 28mm Thickness: 5.5mm Coarseness: 14 teeth per square cm (coarse) Rasp Care In order to keep your rasps clean and free from corrosion ...
  2. Workshop Heaven Hand Stitched Threesquare Rasp 150mm No.4 (38tcm)

    £29.50

    Used for working small flats, cutting grooves and forming acute internal corners down to 60 degrees, the triangular section and finely toothed corners of the threesquare rasp makes it a versatile favourite.

    Working into the groove at the top of a 3D heart shape for example, or undercutting a lambs tongue detail. The last third of the rasp is tapered, so it can also work a groove into a flat surface.

    • Shoulder to tip: 150m...
  3. Workshop Heaven Hand Stitched Hand Rasp 150mm No.3 (28tcm)

    £26.50
    A fairly aggressive hand rasp for initial shaping of flat or convex surfaces. Both faces of the rasp are toothed right up to the edges. The sides are safe but for finer work might benefit from a few swipes with a diamond stone to remove any slight deformation from the toothing process. With both faces toothed, you can flip the rasp and carry on when working in oily or resinous material. Shoulder to tip: 150mm Overall length: 290mm ...
  4. Workshop Heaven Hand Stitched Square Rasp 150mm No.4 (38tcm)

    £29.50

    Square rasps are invaluable for forming angular shapes from round ones – forming a square or arched hole from a drilled one is the classic example.

    The 150mm square rasp has a tapered tip and a slender 5mm square section, so it is easy to get started into holes of 7mm or larger. The corners are finely toothed so it will cut right into a corner leaving the smallest possible radius. A popular modification is to grind the teet...

  5. Workshop Heaven Hand Stitched Hand Rasp 250mm No.2 (10tcm)

    £44.50

    A vicious stock remover for hogging away waste on flat or convex surfaces with minimum effort, this heavy rasp is a delightful tool to work with.  Typical examples of its work include forming a square blank into a tapered octagon for a leg, rounding over a chair back or radiussing the corners of boards.
    The sides are safe so you can work right up to internal corners without fear of cutting into them.

    • Shoulder to tip:...
  6. Workshop Heaven Hand Stitched Rasp Set 150mm with free tool roll

    £195.00
    323075 323076 323077 323059 323007 323049 ...
  7. Workshop Heaven Hand Stitched Rasp Set 250mm

    £125.00
    323080 323079 323078...
  8. Quangsheng No. 5 1/2 with Free Extra Iron

    £164.50

    In many ways it is better to think of the 5-1/2 as a short try plane or panel plane, rather than a broad jack plane. It takes a broad, shallow shaving, so if you work with reasonably straight or pre-machined material it will deal with small corrections on wide surfaces very efficiently.

    Conversely, if you work with timber that starts off like a propeller blade, the narrower No.5 honed with a steep camber and used across the grain ...

  9. Workshop Heaven Hand Stitched Half Round Rasp 150mm No7 (70tcm)

    £43.50
    This fine half round rasp is excellent for refining curves and is your main workhorse for establishing the final shape. 150mm from shoulder to tip, 16mm wide tapering down to 9mm at the tip and 5mm thick tapering down to 2mm at the tip. Fitted with a Holtzapffel pattern walnut handle....
  10. Workshop Heaven Hand Stitched Round Rasp 150mm No9 (90tcm)

    £56.00
    Round rasps are excellent for opening out and softening the shape of holes in a drilled blank and other tight internal curves. 150mm from shoulder to tip, 6mm diameter tapering down to 3.5mm at the tip. Fitted with a Holtzapffel pattern walnut handle....
  11. Workshop Heaven Hand Stitched Cabinet Rasp 150mm No3 (28tcm)

    £29.50
    Cabinet rasps have a wider, flatter profile than half round rasps and tend to produce faster results on surfaces with a shallow curvature. This medium rasp is designed for hogging away material fast in the early stages of defining the shape of the workpiece. The 28teeth per centimetre grain is ideal for exotic hardwoods, bone and antler. 150mm from shoulder to tip, 17mm wide tapering down to 13mm at the tip and 4mm thick tapering down to 3mm a...
  12. Workshop Heaven Hand Stitched Cabinet Rasp 150mm No5 (48tcm)

    £34.50

    This medium toothed cabinet rasp has a similar section to a halfround but flatter, so it can’t work such tight curves but is more efficient on shallow ones. 

    • Shoulder to tip: 150mm
    • Overall length: 290mm approx
    • Face width: 17mm
    • Thickness: 3mm
    • Coarseness: 48 teeth per square cm (medium/coarse)
    • Fitted with a Holtzapffel pattern walnut handle.

    Rasp Care

  13. Workshop Heaven Hand Stitched Half Round Rasp 150mm No3 (28tcm)

    £29.50
    This medium half round rasp is designed for hogging away material fast in the early stages of defining the shape of the workpiece. The coarsest rasps tend to work better on soft materials, so this one is ideal for exotic hardwoods bone and antler, for European hardwoods we recommend going a touch coarser, for softwoods a little coarser still. 150mm from shoulder to tip, 16mm wide tapering down to 9mm at the tip and 5mm thick tapering down to 2...
  14. Workshop Heaven Hand Stitched Half Round Rasp 150mm No5 (48tcm)

    £34.50
    This relatively fine half round rasp is excellent for refining curves and is your main workhorse for establishing the final shape. 150mm from shoulder to tip, 16mm wide tapering down to 9mm at the tip and 5mm thick tapering down to 2mm at the tip. Fitted with a Holtzapffel pattern walnut handle....
  15. Workshop Heaven Hand Stitched Cabinet Rasp 150mm No7 (70tcm)

    £43.50

    The fine toothed No.7 cabinet rasp is a lovely tool for finessing gently flowing shapes on larger workpieces. More efficient on shallow curves and able to cut sideways to produce deep crisp undercuts, a lovely tool to use.

    • Shoulder to tip: 150mm
    • Overall length: 290mm approx
    • Face width: 17mm
    • Thickness: 3mm
    • Coarseness: 70 teeth per square cm (fine)
    • Fitted with a Holtzapffel pattern...
  16. Workshop Heaven Hand Stitched Round Rasp 150mm No6 (60tcm)

    £32.00
    Round rasps are excellent for opening out and softening the shape of holes in a drilled blank and other tight internal curves. 150mm from shoulder to tip, 6mm diameter tapering down to 3.5mm at the tip. Fitted with a Holtzapffel pattern walnut handle....
  17. Workshop Heaven Hand Stitched Round Rasp 150mm No7 (70tcm)

    £39.00
    Round rasps are excellent for opening out and softening the shape of holes in a drilled blank and other tight internal curves. 150mm from shoulder to tip, 6mm diameter tapering down to 3.5mm at the tip. Fitted with a Holtzapffel pattern walnut handle....
  18. Workshop Heaven Hand Stitched Round Rasp 150mm No8 (80tcm)

    £49.00
    Round rasps are excellent for opening out and softening the shape of holes in a drilled blank and other tight internal curves. 150mm from shoulder to tip, 6mm diameter tapering down to 3.5mm at the tip. Fitted with a Holtzapffel pattern walnut handle....
Page:
  1. 1
  2. 2
Grid  List 
Loading Image
Loading Image
Loading Image