To produce accurate joinery efficiently there are lots things that you need to get right; preparing the timber accurately, putting the line in the right place, marking the waste, not crossing the lines, and checking your work at each stage before moving on. Getting to the end and realising that the fit is poor because your pound shop engineers square isn't quite square is utterly soul destroying.
These Moore & Wright instruments are very accurately manufactured bits of kit indeed.
Moore & Wright 400 series BS939 Grade B 4" Engineers' Square 100mm/4"
The blades of these squares are straight to a maximum total deviation of 8 microns, the working faces of the stock are ground to a unilateral (concave) tolerance of 6 microns and the two are square to each other (inside and outside) to a maximum total deviation of 16 microns.
- 100mm / 4" (internal dimension)
- BS939 Grade B
Moore & Wright Dividers 150mm/6"
The hardened steel legs of Moore & Wright dividers are carefully heat treated so they can be thin yet surprisingly stiff. The bowspring offers just the right resistance to hold a measurement beautifully without making them heavy to adjust.
Moore & Wright ER112 Steel Engineers Rule 300mm/12"
The Moore and Wright ER112 is a high quality 300mm / 12" engineers rule, correctly tempered and standard at 20 degrees C with anti-glare finish and permanently etched markings. Imperial on one side (12" in 10ths, 20ths, 50ths and 100ths as well as 16ths, 32nds and 64ths) Metric on the other (300mm in mm and 0.5mm).
D end with hanging hole.
Moore & Wright ER106F Steel Engineers Rule 150mm/6"
Correctly tempered and standard at 20 degrees C with anti-glare finish and permanently etched markings. Imperial on one side (6" in 10ths, 20ths, 50ths and 100ths as well as 16ths, 32nds and 64ths) Metric on the other (150mm in mm and 0.5mm). D end with hanging hole.
Regular price if purchased separately: £73.00
Write Your Own Review
Moore & Wright Measuring Set