Designed by Bob Loveless, the loveless bolt forms a strong mechanical fixing by assembling the bolt through the blade and handle and then screwing it up tight. The bits on the end are ground off flush, leaving a strong, beautiful, permanent fixture.
Made in Europe, these high quality, dimensionally accurate bolts have just enough play in the threads to allow the epoxy to squeeze in and form a permanent bond.
Nut Outer Diameter as specified above, accurate to +0/-0.02mm for a nice close interference fit.
- Outer nut diameter: 6mm
- Screw length: 42mm
- Thread: 39mm
- Nuts: Brass
- Bolt: Stainless
- Outside diameter of threads: 3.8mm (so using a 4mm drill for the tang you get a tenth of clearance)
- Price shown is per individual bolt - i.e. one screw and two nuts.