Squares, Bevels & Centre Finders

Squares, Bevels & Centre Finders

An accurate square one of the first tools you should own, your square is used so frequently that most woodworkers carry it in their apron pocket or just leave it on the bench.

It is also not something to economise on, a cheap 'nearly square' will cause you nothing but problems, whereas investing in a good quality Starrett, Moore & Wright or Kinex square will help you to start off right, catch problems before they happen, and ultimately achieve accurate results.

All of the Engineer's squares we offer here meet or exceed BS939 grade B.

Page:
  1. 1
  2. 2
  3. 3
  4. 4
Grid  List 
  1. Marples Limited Edition Satinwood 9" Sliding Bevel, Brass Faced

    £42.50

    Sliding bevels are an indispensable tool for recording, storing and transferring angles from drawings to workpieces and from one component to another.

    Brass faced Sri Lankan satinwood with a solid brass screw and blued steel blade

    ...
  2. Marples Limited Edition Satinwood 3" (75mm) Dovetail Marker 1:6

    £13.50

    Made in Sheffield by Joseph Marples, this limited edition Satinwood dovetail marker has a brass face and blued steel blade secured with three brass rivets.

    Used for laying out dovetail joinery, the 6:1 ratio produces a stronger but perhaps less elegant joint than the 1:8 version. Often preferred for use on softer timbers, the 6:1 ratio is also good for concealed dovetails where strength is the only consideration.

    ...
  3. Marples Rosewood 9" Sliding Bevel with Screwdriver lock

    £17.50

    Sliding bevels are an indispensable tool for recording, storing and transferring angles from drawings to workpieces and from one component to another.

    Brass faced Rosewood with a solid brass screw and blued steel blade. Screwdriver lock.

    ...
  4. Shinwa Carpenters Square - Set of 3

    £70.00

    Shinwa hard chrome plated stainless steel Japanese flat carpenters square with deeply etched metric full mm graduations inside and outside on both faces. Used in the same way as a framing square, with one leg hung over an edge with its face acting as a stock.

    Set includes 1 each of the following:

    • 500mm long leg / 25cm short leg
    • 300mm long leg / 15cm short leg
    • 150mm long leg, 7.5cm short leg
  5. Shinwa Radius And Gauge set

    £26.00

    Set including the Shinwa A1 and A2 engineer's radius scales and the 700A taper gauge

    They are convenient gauges for measuring radii and rod diameters and gap readings.

    Hardened stainless steel with deeply etched graduations.

    Set contains:

    • Shinwa Radius Scale A-1 R 0.5 - 7
    • Shinwa Radius Scale A-2 R 8-15
    • Shinwa Taper Gauge No 700A
    ...
  6. Shinwa Measuring set

    £20.00

    The Shinwa stainless steel 150mm try square has whole mm graduations with mythology characters  decorated on the relief stock. Accurate to 1/10mm  per 10cm
    175mm x 95mm 

    The Shinwa Stainless steel Mitre Gauge 45 is double sided  with highly accurate ungraduated internal and external mitres.

    ...
  7. Starrett Metric Student Combination Square 150mm spare blade

    £36.28

    A replacement Metric blade for the  the 150mm Student Square.
    The hardened steel blade is engraved with full and half mm on both faces

    ...
  8. Shinwa Aluminium Sliding Bevel - 300mm with Angle Scale

    £39.90
    Shinwa braced adjustable sliding bevel 300mm....
  9. Shinwa Stainless Steel Mitre Gauge 45

    £12.00
    Shinwa stainless steel internal and external mitre gauge....
  10. Schtickle Starrett C11HC-6-16R 6" Combination Square with Square and Center Head

    £75.00

    The Starrett 6" Combination Square with Square and Center Head includes a reversible lock bolt, scriber, spirit level (except 4"), and hardened steel, photo-engraved blade with regular or satin chrome finish.

    The combination square includes a cast iron head with black wrinkle finish. 6”, 16R Grad with Center Head, Satin Chrome Blade.

    • Schtickle Starrett 177C 8-1/2oz. Steel Plumb Bob

      £44.00

      These are overstock; new and unused.The steel 8-1/2 oz. plumb bob is used to achieve precise accuracy in all layout work, construction and surveying. Solid steel construction provides a low center of gravity and great weight in proportion to their short length and small diameter.

      ...
    • Shinwa Stainless Steel Mitre Square 45 90

      £18.50
      Beautifully made from stainless steel and decorated with images from the Japanese zodiac, the Shinwa 15A mitre square is a highly useful layout tool....
    • Shinwa 3D Mitre Square 45 90 Aluminium

      £18.50
      Japanese 3D mitre template for quickly and accurately transferring 45 and 90 degree lines around a corner....
    • Starrett 10MEH-150 Met/Imp Student Combination Square 150mm - 5-3/4inch

      £46.50
      A small, simplified combination square, specifically designed to make Starrett accuracy and quality available to students at a price they can afford. No bubble, no scriber, the 150mm / 5-3/4in blade is not interchangeable with standard size ones. The hardened steel blade is engraved with full mm and 64ths on one side, half mm and 32nds on the other. Precision ground cast head with crinkle finish. Packaging: cardboard box...
    • Starrett 13MA Metric Double Square 100mm

      £55.50
      Light, compact, adjustable, and deliciously accurate; the 100mm Starrett 13MA double square is the perfect tool for checking fine joinery. The facility to slide the unwanted length of the blade out of the way is invaluable, when checking the outside shoulder of a rebate or tenon for example. As you would expect from Starrett, the accuracy is well within workshop grade B. Both sides of the hardened steel blade are engraved with full mm on one ...
    • Shinwa Carpenter's Square, Hard Chrome Finish 500mm with 8 Scales

      £34.50
      Shinwa large Japanese carpenters square with deeply etched metric full mm graduations inside and outside on both faces....
    • Shinwa Carpenter's Square, Hard Chrome Finish 300mm with 8 Scales

      £32.50
      Shinwa medium Japanese carpenters square with deeply etched metric full mm graduations inside and outside on both faces....
    • Shinwa Profiled Carpenter's Framing Square Hard Chrome Finish 300mm

      £24.50
      The Shinwa 10647 carpenter's framing square is a light and versatile tool with clear full mm graduations inside and outside originating from the apex on both faces (8 scales in total)....
Page:
  1. 1
  2. 2
  3. 3
  4. 4
Grid  List 
Loading Image
Loading Image
Loading Image