Fujikawa Japanese Bench Chisels

Fujikawa Japanese Bench Chisels

Fujikawa professional Japanese bench chisels are an absolute delight to use. Light, beautifully balanced and breathtakingly sharp, they are individually handmade in the finest traditions of Japanese toolsmithing.

The trademark of a gourd with a ribbon around it is a traditional luck bringing item, much like the horseshoe in our culture. Some people in Japan still hang such gourds outside their houses. The struck mark beside the gourd on the backs of the blades is the Kanji for hand forged.

Click here to read our blog on how to prepare a Japanese chisel

For further information please click on the individual items below.

Grid  List 
  1. Fujikawa Professional Oire Nomi Japanese Chisel Set of 5 with FREE Tool Roll

    £205.00

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 to make the hagane layer that forms the back and the cutting edge. There are three main grades of white steel, No1 having the highest carbon content, and a myriad of sub grades within each. It took 10 years of experimentation to find the perfect grade, but they can now produce blades which have similar hardness and edge retention to blue, but retain the higher fracture re...

  2. Fujikawa Professional Oire Nomi Japanese Chisels Box Set of 10

    £389.50

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 to make the hagane layer that forms the back and the cutting edge. There are three main grades of white steel, No1 having the highest carbon content, and a myriad of sub grades within each. It took 10 years of experimentation to find the perfect grade, but they can now produce blades which have similar hardness and edge retention to blue, but retain the higher fract...

  3. Fujikawa Professional Oire Nomi Japanese Chisel 3mm

    £40.50

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 hardened to RC68, to make the hagane layer that forms the back and the cutting edge and fitted in a Japanese Red Oak handle.

    The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied.

    ...
  4. Out of Stock

    Fujikawa Professional Oire Nomi Japanese Chisel 6mm

    £41.50

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 hardened to RC68, to make the hagane layer that forms the back and the cutting edge and fitted in a Japanese Red Oak handle.

    The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied.

    ...
  5. Fujikawa Professional Oire Nomi Japanese Chisel 9mm

    £42.50

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 hardened to RC68, to make the hagane layer that forms the back and the cutting edge and fitted in a Japanese Red Oak handle.

    The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied.

    ...
  6. Out of Stock

    Fujikawa Professional Oire Nomi Japanese Chisel 12mm

    £43.50

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 hardened to RC68, to make the hagane layer that forms the back and the cutting edge and fitted in a Japanese Red Oak handle.

    The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied.

    ...
  7. Out of Stock

    Fujikawa Professional Oire Nomi Japanese Chisel 15mm

    £44.50
    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 to make the hagane layer that forms the back and the cutting edge. There are three main grades of white steel, No1 having the highest carbon content, and a myriad of sub grades within each. It took 10 years of experimentation to find the perfect grade, but they can now produce blades which have similar hardness and edge retention to blue, but retain the higher fracture resis...
  8. Out of Stock

    Fujikawa Professional Oire Nomi Japanese Chisel 18mm

    £46.50

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 hardened to RC68, to make the hagane layer that forms the back and the cutting edge and fitted in a Japanese Red Oak handle.

    The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied.

    ...
  9. Out of Stock

    Fujikawa Professional Oire Nomi Japanese Chisel 24mm

    £47.50

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 hardened to RC68, to make the hagane layer that forms the back and the cutting edge and fitted in a Japanese Red Oak handle.

    The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied.

    ...
  10. Fujikawa Professional Oire Nomi Japanese Chisel 30mm

    £50.50

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 hardened to RC68, to make the hagane layer that forms the back and the cutting edge and fitted in a Japanese Red Oak handle.

    The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied.

    ...
  11. Fujikawa Professional Oire Nomi Japanese Chisel 36mm

    £52.50

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 hardened to RC68, to make the hagane layer that forms the back and the cutting edge and fitted in a Japanese Red Oak handle.

    The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied.

    ...
  12. Fujikawa Professional Oire Nomi Japanese Chisel 42mm

    £55.00

    Fujikawa use a specially selected grade of Hitachi White Paper Steel No1 hardened to RC68, to make the hagane layer that forms the back and the cutting edge and fitted in a Japanese Red Oak handle.

    The manufacturers recommend honing a single flat bevel, following the optimal 34 degree angle that the tools are ground to when supplied.

    ...
  13. Deluxe Waterstone Sharpening Kit

    £177.03

    £196.70

    The complete King Japanese waterstone sharpening kit for professional results.

    The coarse 220 grit water stone removes material quickly - ideal for restoring primary cutting bevels and initial back flattening. The 1000 grit waterstone produces a finely misted finish that forms the basis of the polish. The surface is then refined by polishing through the previous finish, first on the 4000 grit water stone, then the 6000 grit waters...

  14. Handmade Suede Leather Tool Roll 6 Pocket

    £37.20
    Extra thick, soft, suede leather 6 pocket tool roll Fully riveted and a chunky woven tie strap secures your tools when you have to take them with you. ...
  15. Handmade Suede Leather Tool Roll 12 Pocket

    £58.80
    This suede leather 12 pocket tool roll is made from extra thick, soft, sumptuous suede that just slips through your fingers. Fully riveted construction and a chunky woven tie strap secure your tools when you have to take them with you. The ultimate luxury accommodation for treasured tools. Overall size: 780mm x 420mm x 2mm Three 75mm wide pockets and nine 55mm pockets. The pockets are 145mm deep. (note: these dimensions are approxim...
  16. Magnetic Tool Bar 8 inch

    £5.00
    Magnetic storage bars are a great way to keep your tools organised and maximise the use of vertical surfaces in the workshop. There are lots of magnetic bars on the market, most of them overpriced, and most of them designed for holding lightweight kitchen utensils rather than tools. Although relatively inexpensive, these have plenty of grab and really seize the tool from your hand with a satisfying clunk. Ideal for chisels, rasps, files, saws...
  17. Magnetic Tool Bar 12 inch

    £7.50
    Magnetic storage bars are a great way to keep your tools organised and maximise the use of vertical surfaces in the workshop. There are lots of magnetic bars on the market, most of them overpriced, and most of them designed for holding lightweight kitchen utensils rather than tools. Although relatively inexpensive, these have plenty of grab and really seize the tool from your hand with a satisfying clunk. Ideal for chisels, rasps, files, saws...
  18. Magnetic Tool Bar 18 inch

    £11.00
    Magnetic storage bars are a great way to keep your tools organised and maximise the use of vertical surfaces in the workshop. There are lots of magnetic bars on the market, most of them overpriced, and most of them designed for holding lightweight kitchen utensils rather than tools. Although relatively inexpensive, these have plenty of grab and really seize the tool from your hand with a satisfying clunk. Ideal for chisels, rasps, files, saws...
  19. 12" Magnetic Tool Bar Special 3 for 2 Pack

    £15.00

    12" Magnetic Tool Bar Promotional Pack

    Contains THREE 12" Magnetic Tool Bars for the price of 2

    3 for 2 or buy 2 get one Free, whichever way you look at it, this is a great way to make the most of every little bit of spare wall space in the workshop and keep your tools off the bench but close to hand.

    Regular price of 12" bars: £7.50 each

    ...
Grid  List 
Loading Image
Loading Image
Loading Image