A vicious stock remover for hogging away waste on flat or convex surfaces with minimum effort, this heavy rasp is a delightful tool to work with.  Typical examples of its work include forming a square blank into a tapered octagon for a leg, rounding over a chair back or radiussing the corners of boards.
The sides are safe so you can work right up to internal corners without fear of cutting into them.

• Shoulder to tip:...

Long, broad, and highly efficient, this coarse rasp is used for initial shaping of larger workpieces like table legs, arched aprons or large sculptural pieces. Forming the initial facets that define the curves and proportions of the piece. Shoulder to tip: 250mm Overall length: 395mm approx Face width: 28mm Thickness: 5.5mm Coarseness: 14 teeth per square cm (coarse) Rasp Care In order to keep your rasps clean and free from corrosion ...

....

323080 323079 323078...

323075 323076 323077 323059 323007 323049 ...

A fairly aggressive hand rasp for initial shaping of flat or convex surfaces. Both faces of the rasp are toothed right up to the edges. The sides are safe but for finer work might benefit from a few swipes with a diamond stone to remove any slight deformation from the toothing process. With both faces toothed, you can flip the rasp and carry on when working in oily or resinous material. Shoulder to tip: 150mm Overall length: 290mm ...

Square rasps are invaluable for forming angular shapes from round ones – forming a square or arched hole from a drilled one is the classic example.

The 150mm square rasp has a tapered tip and a slender 5mm square section, so it is easy to get started into holes of 7mm or larger. The corners are finely toothed so it will cut right into a corner leaving the smallest possible radius. A popular modification is to grind the teet...

Used for working small flats, cutting grooves and forming acute internal corners down to 60 degrees, the triangular section and finely toothed corners of the threesquare rasp makes it a versatile favourite.

Working into the groove at the top of a 3D heart shape for example, or undercutting a lambs tongue detail. The last third of the rasp is tapered, so it can also work a groove into a flat surface.

• Shoulder to tip: 150m...

This medium half round rasp is designed for hogging away material fast in the early stages of defining the shape of the workpiece. The coarsest rasps tend to work better on soft materials, so this one is ideal for exotic hardwoods bone and antler, for European hardwoods we recommend going a touch coarser, for softwoods a little coarser still. 150mm from shoulder to tip, 16mm wide tapering down to 9mm at the tip and 5mm thick tapering down to 2...

This relatively fine half round rasp is excellent for refining curves and is your main workhorse for establishing the final shape. 150mm from shoulder to tip, 16mm wide tapering down to 9mm at the tip and 5mm thick tapering down to 2mm at the tip. Fitted with a Holtzapffel pattern walnut handle....

This fine half round rasp is excellent for refining curves and is your main workhorse for establishing the final shape. 150mm from shoulder to tip, 16mm wide tapering down to 9mm at the tip and 5mm thick tapering down to 2mm at the tip. Fitted with a Holtzapffel pattern walnut handle....

Round rasps are excellent for opening out and softening the shape of holes in a drilled blank and other tight internal curves. 150mm from shoulder to tip, 6mm diameter tapering down to 3.5mm at the tip. Fitted with a Holtzapffel pattern walnut handle....

Round rasps are excellent for opening out and softening the shape of holes in a drilled blank and other tight internal curves. 150mm from shoulder to tip, 6mm diameter tapering down to 3.5mm at the tip. Fitted with a Holtzapffel pattern walnut handle....

Round rasps are excellent for opening out and softening the shape of holes in a drilled blank and other tight internal curves. 150mm from shoulder to tip, 6mm diameter tapering down to 3.5mm at the tip. Fitted with a Holtzapffel pattern walnut handle....

Round rasps are excellent for opening out and softening the shape of holes in a drilled blank and other tight internal curves. 150mm from shoulder to tip, 6mm diameter tapering down to 3.5mm at the tip. Fitted with a Holtzapffel pattern walnut handle....

Cabinet rasps have a wider, flatter profile than half round rasps and tend to produce faster results on surfaces with a shallow curvature. This medium rasp is designed for hogging away material fast in the early stages of defining the shape of the workpiece. The 28teeth per centimetre grain is ideal for exotic hardwoods, bone and antler. 150mm from shoulder to tip, 17mm wide tapering down to 13mm at the tip and 4mm thick tapering down to 3mm a...

This medium toothed cabinet rasp has a similar section to a halfround but flatter, so it can’t work such tight curves but is more efficient on shallow ones. 

• Shoulder to tip: 150mm
• Overall length: 290mm approx
• Face width: 17mm
• Thickness: 3mm
• Coarseness: 48 teeth per square cm (medium/coarse)
• Fitted with a Holtzapffel pattern walnut handle.

Rasp Care