When fitting a replacement blade on a Gyokucho Fugaku saw, we recommend installing the tooth protection strip supplied with the saw or using the cardboard sleeve supplied with the spare blade as this makes the blade easier to handle.
The crosshead screws are Japanese industrial standard (JIS), so although they look like a PH No.2 you will actually get better engagement with a PH No.1.
Remove the screw on the spine completely, slacken off the pivot screw, and the blade will slide out of the spine. Slot the replacement blade into place and reverse the process.
- Blade length: 240mm
- Blade thickness: 0.6mm
- Pitch: 1.9mm /13.4tpi